Every switch on the layout has been checked for clearance through the frog. The Fast…
GaryJuly 19, 2024
I had to postpone operating in that the locos have not been used for at…
GaryJuly 13, 2024
A low dust, light weight mud was used to cover screws, joints, and a few…
GaryJuly 7, 2024
Vertical 1x2" strips were glued and screwed to each joist to support the fascia. Mine…
GaryJuly 3, 2024
All the Tortoises have been mounted and linkage installed for the next town: Cottonwood. Cut…
GaryJune 30, 2024
Installed what will be the programming track and thinking of also using it as a…
GaryJune 26, 2024
I got a much needed break from working under the layout. We took a trip…
GaryJune 24, 2024
The next to the last item to be finished for Gerber is the wye control…
GaryJune 8, 2024
The rest of the fascia was added for Gerber, phone cutout installed, holes patched, paint…
GaryJune 4, 2024
I discovered a short in Gerber Yard - all tracks! Let's see, I changed the…
GaryJune 1, 2024
I'm a little behind in posting. Last week I finished the final switch for Gerber. …
GaryMay 31, 2024
Tom Pearson came over on May 16 and again on the 30th and all feeders…
GaryMay 30, 2024
I've been slow in posting so I backdated a couple of entries to show when…
GaryMay 16, 2024
"Speed" Muller came over and helped troubleshoot the Arduino sketch. Note that the pushbuttons have…
GaryMay 13, 2024
I had to make a few changes in how the panel would be constructed. Instead…
GaryApril 29, 2024
All those dangling blocks of wood with slide switches mounted are now installed for Gerber…
GaryApril 25, 2024
I now have all my newer T1300 throttles at the expense of the older ones. …
GaryJanuary 7, 2024
All the throw rods were clipped off that extended too far. I spent a good…
GaryJanuary 5, 2024